9845B/C
Mainframe References 10-7
208
Operation not allowed
on
tape. Only the BKUP
file
used
in
DBBACKUP
and
DBRECOVER
is
allowed
on
tape.
2
1 0 Bad status array. It must
be
defined as integer precision with;;:,:
10
elements.
211
213
2111
Check spelling and current size.
Improper
data
base specified or data base not open. Improper
name,
or
per-
forming data base operation with invalid name.
Data set not found. Check set
name
or
number
and
make sure
it
is
on
the
volume specified
in
the
schema.
Reserved for future use.
Data base requires creation.
Perform a DBCREATE.
2 1 5 - 2 1
7 Reserved for future use.
2 1
8 Volume
name
not
part of data base. Check spelling.
218
Out
of available memory for a DBOPEN, DBBACKUP
or
DBRECOVER.
Out
of read/write memory
if
executed from main program.
Out
of special
area
if
executed from subprogram,
so
perform the DBOPEN in the main program.
220
Improper
or
illegal use of maintenance word.
Check
spelling
and
leading
or
trailing blanks.
22
1 Data set not created.
222
Reserved for future use.
223
Improper
backup
file.
In
DBRECOVER,
backup
file has incorrect information
in
header
or
no
primary DBBACKUP/RECOVER currently in progress (for
secondary
operation).
22
1I
Incomplete
backup
file.
More than
one
volume in backup; probably
mounted
in
the wrong order.
Start
the recovery over.
225
Improper utility version
number
in root
file.
Rerun
Schema
Processor to
gener-
ate new root
file.
228
Corrupt
data
base - must purge
and
redefine. Purge root
file
and
run
Schema
Processor.
227
Corrupt
data
base - all sets require erasure.
228
Data sets
cannot
be
re-created without root file.
228
Operation
not
allowed while DBOPEN current. Perform a DBCLOSE
mode
1.
230
Improper set list in DBBACKUP, DBCREATE, DBERASE, DBPURGE
or
dupli-
cate sets
in
the
set
list.
23
1 -
232
Reserved for future use.
233
Required
data
set
root
file
not mounted. Mount it
and
perform a VOLUME
DEVICES ARE.
2311
235
238
Referenced line not a PACKFMT statement. Make sure line identifier
is
correct
and
that
it
references a PACKFMT statement.
Reserved for future use.
Insufficient length in a
PACK statement,
or
insufficient current length in
an
UNPACK. Insufficient length
in
a DBBACKUP
or
DB
RECOVER statement.
237
List
length>
32767
in
PACK or UNPACK. Array in PACKFMT too large.
Make sure
it
is
the
correct variable; redimension
if
necessary.
238
Numeric conversion error. Improper real
number
found.
Check
PACKFMT to
make sure a
REAL
or
SHORT variable, not INTEGER
is
being unpacked.
I
To Next Page
Loading...
Need help?
General
