HP ap5000 - All-in-One Point of Sale System - Page 23

5. To remove the hard drive from the plastic carrier, pull up on the two ends on one side of the carrier
(1) and rotate the drive out of the carrier (2).
Figure 2-19 Removing the Hard Drive from the Carrier
6. To insert the new drive in the carrier, hold the drive at a slight angle and place one side of the hard
drive in the carrier (1), then press the other side straight down into the carrier (2).
Figure 2-20 Placing the Hard Drive in the Carrier
ENWW Removing and Replacing the Hard Drive 17