Components and major assemblies
Link guide
The link guide rarely fails and is not a FRU.
The link is attached to the paper guide (callout 1) and the rear door (simplex products; callout 2) or
duplexing-feed guide assembly (duplex products; callout 3).
If the link-guide attachment at the rear door or duplexing-feed guide assembly fails, replace the
appropriate component.
The interior paper guide is not replaceable. If the link-guide to paper guide attachment fails, you must
replace the entire product.
Figure 6-22 Replace the link guide (simplex products)
1
2
Figure 6-23 Replace the link guide (duplex products)
3
138 Chapter 6 Removal and replacement ENWW