Rear-door stopper and link caps (simplex product)
1. Open the rear door.
2. Use a pair of needle-nose pliers to release two tabs, and then remove the link cap.
Figure 6-43 Remove the Rear-door stopper and link caps (simplex product) (1 of 2)
3. Use a small flat blade screwdriver to carefully remove the remaining link cap, and then remove the
Rear-door stopper.
Figure 6-44 Remove the Rear-door stopper and link cap (simplex product) (2 of 2)
ENWW Components and major assemblies 151
To Next Page
Loading...