5. Carefully separate the sensor assembly (callout 6) from the product and pass the wire harness
through the hole in the chassis.
NOTE: See
Figure
6
-
112
Remove the color-misregistration sensor assembly PCA (2 of 5)
on page
193.
Figure 6-114 Remove the color-misregistration sensor assembly PCA (4 of 5)
6
6. Remove the sensor assembly from the product.
Figure 6-115 Remove the color-misregistration sensor assembly PCA (5 of 5)
194 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...