Memory-card cover and PCA (fax/memory-card models)
1. Remove the right cover. See Right cover on page 156.
2. Disconnect one FFC (callout 1) and remove two screws (callout 2).
Figure 6-125 Remove the memory-card cover and PCA (1 of 7)
1
2
3. Open the front door and remove two screws (callout 3).
Figure 6-126 Remove the memory-card cover and PCA (2 of 7)
3
200 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...