HP Color LaserJet CM3530 - Page 32

9. Push down on the DIMM until both latches engage the DIMM.
XOXOXO
XOXOXO
XOXOXOXOXOXO
XOXOXOXOXOXO
XOXO
XO
XO
XO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XOXOXO
XO
XO
XO
XOXOXO
XOXOXOXO
XO
XO
XO
XO
XO
XO
XOXOXO
XIOXIOXIXO
OXI
XO
XIOXIO
XIOXIOXIXO
OXI
XO
XIOXIO
XIOXIOXIXO
OXI
XO
XIOXIO
XIOXIOXIXO
OXI
XO
XIOXIO
NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM
is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the
correct type of DIMM.
10. Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into
the product.
NOTE: To prevent damage to the formatter board, ensure the formatter board is aligned in the
tracks at the top and the bottom of the opening.
24 Chapter 3 Manage and maintain the product ENWW