5. Press the Connect button on the bottom of the mouse (2) for fives seconds. The blue activity LED
from the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
6. Press the Connect button on the bottom of the keyboard (3) for five seconds. The blue activity LED
from the wireless receiver illuminates when the synchronization command has been received and
turns off when synchronization is complete.
Figure 2-34 Synchronizing the Wireless Keyboard and Mouse
NOTE: If the procedure does not work, remove and then re-insert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again.
Connecting the Computer to a Set-Top Box
NOTE: A TV tuner is included with select models only.
1. Turn off power to the computer and the set-top box.
2. Connect a coaxial cable between the TV tuner (1) and the set-top box (2).
38 Chapter 2 Hardware Upgrades ENWW
To Next Page
Loading...
