Service Reference Guide, d200 336493-004 2–5
Setup Utilities and Diagnostics Features
Advanced
CMOS Setup
(Continued)
System Keyboard Detects if a keyboard is present when the computer boots
Absent: keyboard not detected (default)
Present: keyboard detected
APIC ACPI SCI
IRQ
Enables or disables the internal I/O APIC and Multiprocessor
Tables. (Disabling the APIC ACPI SCI IRQ may require you to
reinstall the operating system.)
• Enable: IRQ 20-23 (default)
•Disable: IRQ 09-11
Hyper-Threading
Technology
Enables or disables the Intel Hyper-Threading Technology. (This
item is only selectable with the Intel HTT CPU plug-in.)
• Enable: Intel HTT function enable (BIOS auto detect).
• Disable: Intel HTT function disable (BIOS auto detect).
Internal Graphic
Mode Select
(d220, d228, and
d230 models only)
Selects the size of memory for internal graphics adapter.
• Disable: Internal graphic mode select disable
• 512KB: Share 512KB
• 1MB: Share 1MB
• 8MB: Share 8MB (default)
Internal Graphic
Mode Select
(d240 and d248
models only)
Selects the size of memory for internal graphics adapter.
• Disable: Internal graphic mode select disable
• 1MB: Share 1MB
• 4MB: Share 4 MB
• 8MB: Share 8MB (default)
• 16MB: Share 16 MB
• 32MB: Share 32MB
Power
Management
Setup
ACPI Standby
State
Sets the ACPI standby state when system goes into ACPI
standby mode.
• S1/PSOS: power on suspend
• S3/STR: Suspend to RAM (default)
Restore on
AC/Power Loss
Sets the system status after AC power loss.
• Power Off: System always powers off (Default)
• Power On: System always powers on
• Last State: System returns to the last state before AC power
loss
Resume on Ring Sets the Resume On Ring from soft off.
• Disable: Ring Resume disable (default)
• Enable: Ring Resume enable
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description
To Next Page
