2–8 336493-004 Service Reference Guide, d200
Setup Utilities and Diagnostics Features
2.3 Protecting the Software
To protect software from loss or damage, you should keep a backup copy of all system software,
applications, and related files stored on the hard drive. See the operating system or backup utility
documentation for instructions on making backup copies of data files.
2.4 Restoring the Software
The Windows operating system and software can be restored to its original state by using the
Restore Plus! CD. See the Restore Plus! CD for complete instructions on using this feature.
Password
Option
(Continued)
Password Status Shows password status
Password Check Allows you to set the password check when the supervisor
password is set up.
• Setup: Password prompt appears when BIOS is executed.
• Always: Password verification is checked every time the
computer boots (default).
Load Default
Settings
None Loads the optimal default values for all the setup options.
Save Settings
and Exit
None Saves changes and exits setup.
Exit Without
Savings
None Allows you to exit setup without saving any changes.
✎
Support for Computer Setup options may vary depending on your specific hardware configuration.
Heading Option Description
To Next Page
Loading...
Need help?
General