Service Reference Guide, dc5700 437804-001 3–17
Desktop Management
removable media boot capability, you can protect valuable data assets. Memory Change and
Smart Cover Sensor alerts can be automatically forwarded to system management applications to
deliver proactive notification of tampering with a computer’s internal components.
✎
HP Embedded Security for ProtectTools, the Smart Cover Sensor, and the Smart Cover Lock are
available as options on some systems.
Use the following utilities to manage security settings on the HP computer:
■ Locally, using the Computer Setup Utilities. See the Computer Setup (F10) Utility Guide on
the Documentation and Diagnostics CD included with the computer for additional
information and instructions on using the Computer Setup Utilities. Some computers also
have HP BIOS Configuration for ProtectTools, which is a Windows-based component of
ProtectTools that allows administrators to configure BIOS security settings from within the
running OS.
■ Remotely, using HP Client Manager Software or System Software Manager. This software
enables the secure, consistent deployment and control of security settings from a simple
command-line utility.
The following table and sections refer to managing security features of the computer locally
through the Computer Setup (F10) Utilities.
Security Features Overview
Option Description
Setup Password Allows you to set and enable setup (administrator) password.
✎
If the setup password is set, it is required to change
Computer Setup options, flash the ROM, and make changes
to certain plug and play settings under Windows.
Power-On Password Allows you to set and enable power-on password.
Password Options
(This selection will appear only
if a power-on password is set.)
Allows you to specify whether the password is required for
warm boot (CTRL+ALT+DEL) (appears if a power-on
password is set).
Pre-Boot Authorization Allows you to enable/disable the Smart Card to be used in
place of the Power-On Password.
Smart Cover Allows you to:
• Enable/disable the Cover Lock.
• Enable/disable the Cover Removal Sensor.
✎
Notify User alerts the user that the sensor has detected that
the cover has been removed. Setup Password requires that
the setup password be entered to boot the computer if the
sensor detects that the cover has been removed.
This feature is supported on some models only and will only
appear if a Smart Card reader is attached to the system.
Embedded Security Allows you to:
• Enable/disable the Embedded Security device.
• Reset the device to Factory Settings.
✎
For more information about Computer Setup, see the Computer Setup (F10) Utility Guide.
Support for security features may vary depending on your specific computer configuration.
To Next Page
Loading...
Need help?
General
