HP Compaq dc7600 SFF User Manual

2-4 www.hp.com Hardware Reference Guide
Hardware Upgrades
To open the computer cover with the Smart Cover Lock engaged:
1. Turn off the computer properly through the operating system,
then turn off any external devices.
2. Disconnect the power cord from the power outlet, and disconnect
any external devices.
3. Use the FailSafe Key to remove the tamper-proof screw 1 that
secures the Smart Cover Lock.
4. Push the metal arm that wraps around the air vent grid up and
back 2 to free the Smart Cover Lock from the chassis.
Removing the Smart Cover Lock Screw
5. Remove the computer cover. Refer to “Removing the Computer
Cover.”
To reattach the Smart Cover Lock, secure the lock in place with the
tamper-proof screw.

HP Compaq dc7600 SFF Specifications

General

Processor Speed	Up to 3.8 GHz
Memory	Up to 4 GB DDR2 SDRAM
Form Factor	Small Form Factor (SFF)
Power Supply	240W
Processor	Intel Pentium 4, Intel Celeron D
Storage	Up to 250 GB SATA HDD
Graphics	Intel Graphics Media Accelerator 950
Optical Drive	DVD-ROM, DVD\u00b1RW
Network	Integrated Gigabit Ethernet
Expansion Slots	1 low-profile PCI Express x16, 1 low-profile PCI Express x1, 1 low-profile PCI
Ports	USB 2.0, serial, parallel, PS/2, VGA
Operating System	Windows XP Professional
Chipset	Intel 945G Express Chipset