HP Compaq dc7600 SFF User Manual

A-2 www.hp.com Hardware Reference Guide
Specifications
Power Supply 115V 230V
Operating Voltage Range* 90–264 VAC 90–264 VAC
Rated Voltage Range 100–240 VAC 100–240 VAC
Rated Line Frequency 50–60 Hz 50–60 Hz
Power Output 240 W 240 W
Rated Input Current (maximum)* 5A @ 100 VAC 2.5A @ 200 VAC
Heat Dissipation
Maximum 1260 BTU/hr 318 kg-cal/hr
Typical (idle) 340 BTU/hr 86 kg-cal/hr
*This system utilizes an active power factor corrected power supply. This allows the system to
pass the CE mark requirements for use in the countries of the European Union. The active power
factor corrected power supply also has the added benefit of not requiring an input voltage
range select switch.
HP Compaq Small Form Factor (Continued)

HP Compaq dc7600 SFF Specifications

General

Processor Speed	Up to 3.8 GHz
Memory	Up to 4 GB DDR2 SDRAM
Form Factor	Small Form Factor (SFF)
Power Supply	240W
Processor	Intel Pentium 4, Intel Celeron D
Storage	Up to 250 GB SATA HDD
Graphics	Intel Graphics Media Accelerator 950
Optical Drive	DVD-ROM, DVD\u00b1RW
Network	Integrated Gigabit Ethernet
Expansion Slots	1 low-profile PCI Express x16, 1 low-profile PCI Express x1, 1 low-profile PCI
Ports	USB 2.0, serial, parallel, PS/2, VGA
Operating System	Windows XP Professional
Chipset	Intel 945G Express Chipset