HP Compaq dx7300 MT - 5 Identifying the Chassis, Routine Care, and Disassembly Preparation; 5.1 Chassis Designations; 5.1.1 Microtower (MT)

234 pages

To Next Page

To Previous Page

Service Reference Guide, dx7300 433611-001 5–1

Identifying the Chassis, Routine Care, and

Disassembly Preparation

This chapter provides general service information for the computer. Adherence to the procedures

and precautions described in this chapter is essential for proper service.

CAUTION: When the computer is plugged into an AC power source, voltage is always applied to the

system board. You must disconnect the power cord from the power source before opening the computer

to prevent system board or component damage.

5.1 Chassis Designations

5.1.1 Microtower (MT)

Other manuals for HP Compaq dx7300 MT