1–8 Modem & Networking
Using an Internal Modem
■
Check for pulse or tone dialing
Dial a few digits on the telephone and listen for clicks
(pulses) or tones. Then select:
Windows 98:
1. Select Start > Settings > Control Panel.
2. Double-click the Modems icon > General tab.
3. Select your modem > Dialing Properties > Tone or
Pulse Dialing.
4. Select OK > OK.
Windows 2000 Professional:
1. Select Start > Settings > Control panel.
2. Double-click the Phone and Modem Options icon.
3. Select your location > Edit > Tone or Pulse Dialing.
4. Select OK > OK.
Windows XP Home and XP Professional:
1. Select Start > Control Panel.
2. Double-click the Network and Internet Connections
icon > Phone and Modem Properties (menu in the left
column).
3. Select the Dialing Rules tab.
4. Select your location.
5. Select Edit > Tone or Pulse Dialing.
6. Select OK > OK.
267639-001.book Page 8 Friday, January 18, 2002 8:31 AM
To Next Page
Loading...
