Using an Internal Modem
Modem & Networking 1–11
Windows XP Home and XP Professional:
1. Select Start > Control Panel > Network and Internet
Connections icon.
2. Select Phone and Modem Properties (menu in the left
column) > Modem Tab.
3. Select your modem > Properties > Modem tab.
4. Clear the Wait for Dial Tone Before Dialing check box.
5. If you continue to receive the No Dial Tone error
message after clearing the check box:
a. Select Start > Control Panel > Network and Internet
Connections icon.
b. Select Phone and Modem Properties (menu in the left
column).
c. Select the Dialing Rules tab.
d. Select your location > Edit.
e. Select your location from the drop-down list in the
Country/Region box.
f. Select Apply > OK.
7. Select the Modem tab.
8. Select your modem > Properties.
9. Clear the Wait for Dial Tone Before Dialing check box.
267639-001.book Page 11 Friday, January 18, 2002 8:31 AM
To Next Page
Loading...
