Removal and Replacement Procedures
Maintenance and Service Guide 5–5
5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in Hibernation, turn the computer on
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the front panel
toward you.
Battery Pack Spare Part Number Information
8-cell Li-Ion
6-cell Li-Ion
6-cell Li-Ion, 4.0 Ah
371786-001
371785-001
383615-001
To Next Page
Loading...
