Compaq Professional Workstation SP750 Hardware Reference Guide 2-29
Compaq Confidential - Need to Know Required
Writer: Beth Zanca Part Number: 190709-001 File Name: ch2.doc
Last Saved On: 04/12/00 1:02 PM Last Saved By: Lydia Sanchez
Removing an Expansion Board
Reverse the steps in the previous section to remove an expansion
board. When reversing these steps:
❏ Be sure to store the board in antistatic packaging.
❏ Install an expansion slot cover to close the open slot.
Identifying the AGP Graphics Controller Expansion Slot
Your workstation also ships with an Accelerated Graphics Port (AGP)
expansion slot on the system board 1. The following illustration shows
the location of this slot.
Identifying the AGP graphics controller expansion slot
✎
AGP specifications allow an AGP card to occupy up to two
adjacent PCI slots, with additional components or cards, on
your workstation system board.
✎
For product documentation related to your graphics controller,
refer to the Workstation Reference Library CD included with
your workstation.
To Next Page
Loading...
