2-28 Hardware Upgrades
Compaq Confidential - Need to Know Required
Writer: Beth Zanca Part Number: 190709-001 File Name: ch2.doc
Last Saved On: 04/12/00 1:02 PM Last Saved By: Lydia Sanchez
4. Slide the expansion board into the expansion slot. Press firmly on
the board so that the whole connector seats properly in the
expansion board slot.
✎
If you are installing a full-length PCI board, make sure the
card is engaged with the card guide.
Installing an expansion board
5. Replace the screw at the side of the expansion slot.
6. Replace the workstation access panel.
7. Connect external cables to the installed board, if necessary.
8. Plug the power cord back into the grounded AC outlet and the
back of the workstation.
9. Turn on the system.
10. Reconfigure the workstation, if necessary.
To Next Page
Loading...
