To Next Page

To Previous Page

Removal and replacement procedures 4–15

WLAN module

Before removing the WLAN module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,

and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

Remove the WLAN module:

1. Remove the WLAN module cover:

a. Loosen the Phillips PM2.5X6.0 captive screw 1 that secures the WLAN module component cover to the

computer.

b. Lift the right side of the WLAN module cover 2, swing it to the left, and remove it. The WLAN module

cover is included in the Plastics Kit, spare part number 486621-001.

Description Spare part number

Atheros AR2425 802.11b/g 459339-001

Atheros AR2425 802.11b/g 459339-002

Broadcom BCM4312 802.11b/g 459263-001

Broadcom BCM4312 802.11b/g 459263-002

Atheros AR9280 802.11a/b/g/n 482260-001

Atheros AR9280 802.11a/b/g/n 482260-002

Questions and Answers:

Need help?

Do you have a question about the HP CQ60 Series and is the answer not in the manual?

HP CQ60 Series Specifications

General

Audio	Altec Lansing speakers
RAM	Up to 4GB DDR2
Storage	320GB HDD
Display	15.6" diagonal High-Definition HP BrightView Widescreen Display
Graphics	Integrated Intel Graphics Media Accelerator 4500M
Operating System	Windows Vista
Optical Drive	DVD±RW DL LightScribe
Battery	6-cell Lithium-Ion
Chipset	Intel GL40 Express
Wireless	802.11b/g
Ports	3 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x RJ-45, 1 x Headphone, 1 x Microphone
Card Reader	5-in-1 integrated Digital Media Reader
Webcam	Integrated webcam
Networking	10/100 Ethernet
Weight	2.7 kg (5.95 lbs)