Removal and replacement procedures 4–8
Optical drive
✎
The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see“Battery” on page 4-7).
Description Spare part number
DVD±RW and CD-RW SuperMulti Double Layer Combo Drive 498479-001
DVD±RW and CD-RW SuperMulti Double Layer Combo Drive with LightScribe 498480-001
Blu-ray ROM DVD±RW SuperMulti DL Drive 498481-001
To Next Page
Loading...
