Removal and replacement procedures 4–20
Keyboard cover
Before removing the keyboard cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the keyboard (see “Keyboard” on page 4-17).
Remove the keyboard cover:
1. Remove the 2 Phillips PM2.5x9.0 screws 1 at the corners and the 2 Phillips PM2.0x4.0 screws 2 in the
battery bay that secure the keyboard cover to the computer. The keyboard cover screws are identified by a
triangle icon.
Description Spare part number
Keyboard cover 496828-001
Silver keyboard cover 506848-001
To Next Page
Loading...
