1-4
D Class System Memory Upgrade
Memory Installation Procedure
At the Main menu of the Boot Console Handler, type “in me” to display memory
information.
Note the amount of memory listed in the memory information display. After
installing additional memory, you will check this memory information display again
to verify that the system recognizes the newly installed memory
Example Memory Information Display (Models D200/D210/D310)
Main Menu: Enter command > in me
MEMORY INFORMATION
Slot Card Size Amount Enabled
---- --------- --------------
0 16 MB 16 MB
1 16 MB 16 MB
Physical Memory: 32 MB (0x02000000)
Configured Memory: 32 MB (0x02000000)
Main Menu: Enter command >
Example Memory Information Display (all other D2xx and D3xx Models)
Main Menu: Enter command > in me
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size(a+b) Status
---- -------- ------
0a/b 128MB Configured
1a/b 32MB Configured
2a/b 32MB Configured
--------
TOTAL 192MB
To Next Page
Loading...
