1-3
D Class System Memory Upgrade
Memory Installation Procedure
Memory Installation Procedure
A. Check Existing
System Memory
To check the memory configuration on your system:
Reboot the system by typing /etc/shutdown -r at the HP-UX system prompt:
/etc/shutdown -r
When prompted, halt the boot process by pressing any key on the keyboard:
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
Main Menu ----------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
TOC Soft boot the system
COnfiguration [<command>] Access Configurationmenu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command >
To Next Page
Loading...
Need help?
General