HP D Series User Manual

2-9
R Class System Memory Upgrade
Memory Installation Procedure
F. Remove the
Processor/ Memory
Card
1. Attach an anti-static strap to your wrist, and ground it to the main chassis.
2. Disconnect the cables label P13 and P14 from the back of the
Processor/Memory card.
3. Loosen and remove the two (2) screws that secure the Processor/Memory card to
the chassis.
4. Pull out the two plastic levers on the Processor/Memory card.
5. Pull the Processor/Memory card out of the system cabinet, and set it down on an
anti-static mat.

HP D Series Specifications

General

Brand	HP
Model	D Series
Category	Server
Language	English