258 Chapter 6 Ink Supplies
Ink Supplies
The actual error code is a decimal number that must first be converted to a binary number before it can
be used.
The following table explains the meaning of the different bits (0 or 1). When the value of the error code
is displayed as 0, it means that the Printhead is working correctly.
Error code Meaning Corrective action
0x0000 WORKING
0x00001 FAILS LOGICAL V Clean the electrical connections between the
Printhead and the Carriage. Refer to the cus-
tomer’s Maintenance Guide.
0x00002 FAILS CONTINUITY
0x00004 SHUTDOWN Refer to the ‘Temperature too high proce-
dure’ below
0x00008 FAILS VPP Clean the electrical connections between the
Printhead and the Carriage. Refer to the cus-
tomer’s Maintenance Guide.
0x00010 TEMP EXTREMELY HIGH Refer to the ‘Temperature too high proce-
dure’ below
0x00020 TEMP EXTREMELY LOW Clean the electrical connections between the
Printhead and the Carriage. Refer to the cus-
tomer’s Maintenance Guide.
To Next Page
Loading...