●
Collate allows you to turn collation on or off.
●
Rotation allows you to rotate the print by any multiple of 90°, or you can choose Automatic,
which rotates the print automatically if that will save paper.
●
Printer margins allows you to change the default printer margins.
●
Storage mode offers two options, print and delete (the job is not retained in the job queue) and
print and store (the job is retained in the job queue).
●
Manual mode allows you to enable manual printing with the stacker open for this job (it is disabled
by default).
NOTE: If you edit a quickset after selecting a job, the changed settings are applied only to the current
job and are not saved permanently. You can change the quickset permanently by pressing , then
Print, Scan & Copy quicksets > Print from USB quicksets.
5. When you are satisfied with the quickset settings, press OK to continue.
6. A screen with the following settings appears: Copies, Page order, and Collate. You can check and
change them in this step, regardless of the settings in the quickset. Press Print to continue.
7. After printing, you can choose to print another file or go to the job queue. If you print another file
immediately without returning to the home screen, the temporary settings used for the previous file are
used again.
Print from a computer using the Embedded Web Server or HP
Utility
You can print files in this way from any computer that can access the printer's Embedded Web Server. See
Access the Embedded Web Server on page 43.
From the Embedded Web Server, select the Main tab and then Submit job. From the HP Utility, select Job
Center > Submit Job. You will see the window below.
68 Chapter 8 Printing ENWW
To Next Page
Loading...