4. The list of copy quicksets is displayed. You can choose and/or edit one of the quicksets for the current
job. If you want to change a quickset permanently, or create a new one, press , then Print, Scan &
Copy quicksets, Copy quicksets. For more information on quicksets, see Quicksets on page 47.
The following settings are available. They are divided into three categories: settings for the original
document, settings for how to scan the job, and settings for how to print the job.
●
Quickset name allows you to name the quickset you are working with.
Original
●
Content type allows you to optimize the scan for a line drawing, a photographic image, or a mixed
image.
●
Background removal allows you to remove unwanted background color. You can specify the
strength of this setting, from 0 to 10.
●
Original paper type allows you to specify the paper type on which the original document has been
printed. To optimize scan quality, ensure that this setting is correct.
●
Blueprints invert allows you to generate a scanned image with a light background. It is useful
when the original you intend to scan is a blueprint with a dark background. This option is available
only if the
Original type is set to Blueprints.
Copy settings
●
Copy quality allows you to specify the print quality: Best, Normal, or Fast.
●
Color options allows you to choose color or grayscale scanning.
●
Contrast allows you to adjust the contrast level.
●
De-skew: The scanner has a built-in automatic de-skew algorithm, which measures the skew in
the original, and rotates the scanned image so that the result is perfectly straight.
●
Full width margins are not detected doing a complete scan.
Print settings
●
Size allows you to resize the print in two different ways: to a percentage of its original size, or to
fit a particular paper size. The default is 100% (its original size).
●
Roll policy allows you to specify printing on roll 1 or roll 2, or you can choose Save paper, which
automatically chooses the narrowest roll on which the print will fit.
●
Paper output allows you to send the print to stacker or basket.
●
Copy margin layout allows you to clip content by margins (try to print the image with the same
margins as the original) or to print oversize (scan the image with margins, to which the printer
margins will be added, resulting in a wider margin than in the original document).
●
Storage mode offers two options, copy and delete (the job is not retained in the job queue), and
copy and store (the job is retained in the job queue).
NOTE: If you edit a quickset during this process, the changed settings are applied only to the current
job and are not saved permanently. You can change the quickset permanently by pressing , then
Print, Scan & Copy quicksets > Copy quicksets.
5. When you are satisfied with the quickset settings, press Copy to start copying the job.
ENWW 87
To Next Page
Loading...