6. If two rolls are loaded, you can choose to print on either roll, or you can let the printer choose
automatically.
NOTE: The printer will automatically rotate the image by 90° if it can save paper by doing so.
7. While the scanned image is being printed, you can perform some other operation: you do not need to
wait for the end of the print.
8. After printing, the printer asks whether you want to copy another document. If you load another
document without returning to the home screen, it will be copied with the same settings as the previous
job.
NOTE: By default, if the original document is skewed in the scanner (not loaded straight), the scanner will
try to correct the skew automatically. To turn off this automatic correction, press , then Print, Scan &
Copy quicksets > Copy quicksets > De-skew > Off.
88 Chapter 10 Copying ENWW
To Next Page
Loading...