HP DesignJet T730

The following options are available if you choose manual rmware updates.
●
Using the front panel, swipe down the dashboard and touch , then scroll down the menu and touch
Web Services setup > Product update. Touch Check now to check whether new rmware is available. If
new rmware is available, you are given the opportunity to download and install it.
●
Using the Embedded Web Server, select Firmware Update.
●
Using the HP Designjet Utility under Windows, select your printer, the Admin tab and then follow the
steps in the Firmware Update section.
●
Using the HP Utility under Mac OS X, select Update Firmware.
●
Using a USB pen drive:
a. download the corresponding le from the web at http://www.hp.com/go/T730/support or
http://www.hp.com/go/ T830/support accordingly.
b. Copy the le to the root of the USB pen drive.
c. Plug in the USB host and wait until the front panel shows a new icon.
IMPORTANT: This can take about 30 seconds.
d. Once the new icon named Update Printer appears, touch it and follow the instructions on the front
panel.
The rmware includes a set of the most commonly used paper presets.
Software update
Under Windows or Mac OS X, you are normally oered software updates automatically.
110 Chapter 12 Maintaining the printer ENWW