To Next Page

To Previous Page

3. Open the CD icon on your desktop.

4. Open the Mac OS X HP Designjet Installer icon.

5. Follow the instructions on your screen. You are recommended to use the Easy Install option,

which will install the PCL3 (raster) printer driver. If you would like to install the PostScript driver,

select Custom Installation.

6. The printer software is installed, including the printer driver and the HP Utility.

7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set

up a connection to your printer. Follow the instructions on your screen.

8. When you reach the Select Printer screen, look for your printer's mDNS service name (which

you noted in step

1) in the Printer Name column.

●

If you find the right printer name, scroll sideways to see the Connection Type column, and

check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise, continue

searching further down the list.

●

If you cannot find your printer name with a Bonjour/Rendezvous connection type, check

the box My printer is not in the list.

Click Continue.

ENWW Connect to a network (Mac OS) 13

Software installation

Other manuals for HP Designjet Z5200 - PostScript Printer

Questions and Answers:

Need help?

Do you have a question about the HP Designjet Z5200 - PostScript Printer and is the answer not in the manual?

General

Print Technology	Thermal Inkjet
Number of Inks	8
Memory	32 GB (virtual)
Hard Disk	160 GB
Line Accuracy	+/- 0.1%
Maximum Print Resolution	2400 x 1200 dpi
Ink Colors	Cyan, Magenta, Yellow, Light Cyan, Light Magenta, Light Gray
Media Sizes Supported	Up to 44 inches wide
Connectivity	Gigabit Ethernet (1000Base-T), Hi-Speed USB 2.0
Minimum Line Width	0.02 mm
Maximum Optical Density (Black)	2.5
Media Types	Bond and coated paper, photographic paper, self-adhesive and banner
Media Sizes Standard (Sheets)	A4, A3, A2, A1, A0
Media Sizes Standard (Rolls)	24 to 44-in rolls
Media Thickness	Up to 0.8 mm
Connectivity, Standard	Gigabit Ethernet (1000Base-T); Hi-Speed USB 2.0 certified; EIO Jetdirect accessory slot
Print Languages	Adobe PostScript 3, Adobe PDF 1.7, TIFF, JPEG, HP-GL/2, HP-RTL, CALS G4
Ink Types	Pigment-based
Operating Temperature Range	5 to 40°C
Dimensions (W x D x H)	1770 x 721 x 1050 mm