To Next Page

To Previous Page

9. Continue following the instructions on the screen. When you reach the Printer Queue Created

screen, click Quit to exit, or Create New Queue if you want to connect another printer to the

network.

10. When the HP Printer Setup Assistant has finished, you can remove the CD from the CD drive.

If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the

CD.

TCP/IP connection

1. Go to your printer's front panel and press the Menu key until you see the status screen.

Note the URL of your printer (http://XXXX11 in this example).

2. Insert the HP Start-up Kit CD into your CD drive.

3. Open the CD icon on your desktop.

4. Open the Mac OS X HP Designjet Installer icon.

5. Follow the instructions on your screen. You are recommended to use the Easy Install option,

which will install the PCL3 (raster) printer driver. If you would like to install the PostScript driver,

select Custom Installation.

6. The printer software is installed, including the printer driver and the HP Utility.

7. When the software has been installed, the HP Printer Setup Assistant starts automatically, to set

up a connection to your printer. Follow the instructions on your screen.

14 Chapter 2 Installing the software ENWW

Software installation

Other manuals for HP Designjet Z5200 - PostScript Printer

Questions and Answers:

Need help?

Do you have a question about the HP Designjet Z5200 - PostScript Printer and is the answer not in the manual?

General

Print Technology	Thermal Inkjet
Number of Inks	8
Memory	32 GB (virtual)
Hard Disk	160 GB
Line Accuracy	+/- 0.1%
Maximum Print Resolution	2400 x 1200 dpi
Ink Colors	Cyan, Magenta, Yellow, Light Cyan, Light Magenta, Light Gray
Media Sizes Supported	Up to 44 inches wide
Connectivity	Gigabit Ethernet (1000Base-T), Hi-Speed USB 2.0
Minimum Line Width	0.02 mm
Maximum Optical Density (Black)	2.5
Media Types	Bond and coated paper, photographic paper, self-adhesive and banner
Media Sizes Standard (Sheets)	A4, A3, A2, A1, A0
Media Sizes Standard (Rolls)	24 to 44-in rolls
Media Thickness	Up to 0.8 mm
Connectivity, Standard	Gigabit Ethernet (1000Base-T); Hi-Speed USB 2.0 certified; EIO Jetdirect accessory slot
Print Languages	Adobe PostScript 3, Adobe PDF 1.7, TIFF, JPEG, HP-GL/2, HP-RTL, CALS G4
Ink Types	Pigment-based
Operating Temperature Range	5 to 40°C
Dimensions (W x D x H)	1770 x 721 x 1050 mm