90 Chapter 3 Ink Supplies
Ink Supplies
Troubleshooting Printhead Error Codes
The Printhead Error Codes can be found on the Service Information Print (Setup Menu/Information Menu/
Internal Prints/Print Service Information/Current Information). The actual error code is a decimal number
and it has to be converted to a binary number before it can be used.
In order to convert the decimal error code to a binary error code, you can use a calculator. For example,
if you had the error code 4099, you would enter 4099 as a decimal number and then select the binary
option which would give you a binary number of 1000000000011.
The following table explains the meaning of the different bits (0 or 1). When the value of the error code
is reported as 0, it means that the Printhead is working correctly:
Bit Meaning Bit Meaning
1st FAILS_LOGICAL_V 11th BAD_ACUMEN_ACCESS
2nd FAILS_CONTINUITY 12th WRONG_MODEL
3rd SHUTDOWN 13th MISMATCH
4th FAILS_VPP 14th CSDATA_NOT_RESPONDING
5th TEMP_EXTREMELY_HIGH 15th CSDATA_TRANSMIT_ERROR
To Next Page
Loading...