478 Chapter 10 Repacking instructions
Repacking
Add the carton box, then place on top of it the TUR & STAND boxes (for 60” only, in the case of 42-inch,
the box only contains the STAND).
The rest of parts like ink supplies, cables, manuals, CDs, etc. must be placed in the side boxes.
Take special care when storing the print-heads on its box. They must be stored in vertical position, ensuring
that the white dot is on top. This way the print-head will not be internally damaged during the transport.
See attached picture for your reference.
The printhead special layout in the box is shown in the following picture:
Complete the boxes with the ink supplies, print-head cleaner, cables, 3” core adaptor, CD, etc., and place
them over the printer box.
Add the lateral carton pads and strip the boxes together.
To Next Page
Loading...