Special checks before turning-ON the printer 479
Repacking
Add the carton Lid and strip the pack again as shown in the picture.
The unit is now ready to be shipped.
Special checks before turning-ON the printer
If the printer was properly packaged before the shipment, the risk of having problems during the switching
on process is very low. In any case is worth to check the details we highlight, to ensure that there is not
functional problem when starting the printer.
Check the INK TUBES are in its place
Once the packaging elements have been removed, you have to open the window and check that the tubes
are not out of place.
If it is the case, you have to re locate them manually, just by placing them on the plastic rail (or tube shelf)
so the carriage moves freely along the print zone without clashing with the tubes.
To Next Page
Loading...