2. If the Ink Cartridges are not suitable for priming, the following message will appear on the front
panel. Replace the installed Ink Cartridges with Ink Cartridges that are new or contain less than
88% of ink. Press any key to exit.
3. When the following message appears on the front panel, press OK to continue or Cancel to exit.
4. The front panel displays the following message, then restarts the purge process.
5. When the printer has restarted, the front panel asks you to open the Window and remove all the
Printheads.
6. When you have removed all the Printheads, the front panel asks you to install the Setup
Printheads.
7. When you have installed the Setup Printheads, the front panel displays the following message.
ENWW
Service utilities
107
Service tests and
utilities
To Next Page
Loading...
