Vacuum Fan
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Right Cover on page 216.
2. Remove the Primer Assembly
See Primer Assembly on page 247.
3. Remove the Primer Valves
See Primer Valves on page 249.
4. Remove the Maintenance Cartridge ⇒ See the User’s Guide.
5. Remove the Service Station
See Service Station on page 252.
6. Disconnect the cable labelled on the Vacuum Fan PCA as “Interconnect Cable”.
7. Unroute the cable.
ENWW
Disassembly order
257
Removal and
installation
To Next Page
Loading...
