Solution: Try the following:
●
Remove the Magenta Ink Cartridge and reinstall it into the printer.
●
Replace the Magenta Ink Cartridge.
●
Check that the ISS to Cartridge cable (Magenta Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Magenta Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.1:01
Cause: Bad contact detected in ISS slot 1 floater
Solution: Try the following:
●
Remove the Light Magenta Ink Cartridge and reinstall it into the printer.
●
Replace the Light Magenta Ink Cartridge.
●
Check that the ISS to Cartridge cable (Light Magenta Ink Cartridge) is not damaged and is
correctly connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Light Magenta Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.2:01
Cause: Bad contact detected in ISS slot 2 floater
Solution: Try the following:
●
Remove the Photo Black Ink Cartridge and reinstall it into the printer.
●
Replace the Photo Black Ink Cartridge.
●
Check that the ISS to Cartridge cable (Photo Black Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Photo Black Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.3:01
Cause: Bad contact detected in ISS slot 3 floater
Solution: Try the following:
●
Remove the Matte Black Ink Cartridge and reinstall it into the printer.
●
Replace the Matte Black Ink Cartridge.
●
Check that the ISS to Cartridge cable (Matte Black Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Matte Black Ink Cartridge)
ISS to Cartridge Cables
on page 274.
ENWW
Continuable and non-continuable error codes
49
System error codes
To Next Page
Loading...
