SE 26.4:01
Cause: Bad contact detected in ISS slot 4 floater
Solution: Try the following:
●
Remove the Yellow Ink Cartridge and reinstall it into the printer.
●
Replace the Yellow Ink Cartridge.
●
Check that the ISS to Cartridge cable (Yellow Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Yellow Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.5:01
Cause: Bad contact detected in ISS slot 5 floater
Solution: Try the following:
●
Remove the Light Cyan Ink Cartridge and reinstall it into the printer.
●
Replace the Light Cyan Ink Cartridge.
●
Check that the ISS to Cartridge cable (Light Cyan Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Light Cyan Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.6:01
Cause: Bad contact detected in ISS slot 6 floater
Solution: Try the following:
●
Remove the Light Gray Ink Cartridge and reinstall it into the printer.
●
Replace the Light Gray Ink Cartridge.
●
Check that the ISS to Cartridge cable (Light Gray Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Light Gray Ink Cartridge)
ISS to Cartridge Cables
on page 274.
SE 26.7:01
Cause: Bad contact detected in ISS slot 7 floater
Solution: Try the following:
●
Remove the Red Ink Cartridge and reinstall it into the printer.
●
Replace the Red Ink Cartridge.
50 Chapter 2 System error codes ENWW
System error codes
To Next Page
Loading...
