●
Check that the ISS to Cartridge cable (Red Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
●
Replace the ISS to Cartridge cable (Red Ink Cartridge)
ISS to Cartridge Cables on page 274.
SE 27.1:01
Cause: Calibration failed to due to poor performance of the Magenta/Yellow Printhead in slot 1
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.2:01
Cause: Calibration failed to due to poor performance of the Magenta/Yellow Printhead in slot 2
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.3:01
Cause: Calibration failed to due to poor performance of the Light Cyan/Light Magenta Printhead slot
3
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.4:01
Cause: Calibration failed to due to poor performance of the Light Cyan/Light Magenta Printhead in
slot 4
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.5:01
Cause: Calibration failed to due to poor performance of the Photo Black/Light Gray Printhead in slot 5
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.6:01
Cause: Calibration failed to due to poor performance of the Photo Black/Light Gray Printhead in slot 6
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
SE 27.7:01
Cause: Calibration failed to due to poor performance of the Matte Black/Red Printhead in slot 7
Solution: This may impact your print quality. If it becomes unacceptable in the future, clean all
printheads and check their status.
ENWW
Continuable and non-continuable error codes
51
System error codes
To Next Page
Loading...
