23
Printing Basics: Infrared (Ir) Printing
Using Infrared with a Laptop or Notebook running Windows 98
Setting up a Laptop or Notebook for Infrared
To configure a laptop or notebook for infrared communication, you
may need to make changes to your computer’s BIOS settings. The
procedures for configuring a computer for infrared vary, depending
on the specific device. For instructions on configuring your
particular laptop or notebook, refer to one of the following:
• Reference guide or instructions that came with the device
• Device manufacturer’s web site or support telephone number
• Infrared Data Association (IrDA) web site at: http://www.irda.org
Enabling Infrared
1 Click Start Settings Control Panel.
The Control Panel window is displayed.
2 Double-click the Infrared icon.
The Infrared Monitor dialog box is displayed.
Note:
If the Infrared icon in the Control Panel is not available,
you must load the Infrared driver and/or configure the computer
for infrared. The Infrared driver can be found on the Microsoft
Windows 98/2000 software CD or downloaded from the Microsoft
web site at http://www.microsoft.com.
Or try this: Click the Infrared icon at the end of the taskbar (if it’s
displayed).
To Next Page
Loading...