13
SetSlideshowInterval
You can set the speed at which the slideshow photos transition from one to another.
1. On the
HOME screen, press
to display the
Setup Menu.
2.
Select SlideshowSetup,
3. Use
to select SlideshowInterval, and then use
to select your desired setting.
5,10,30,60seconds,1hour,or24hours
4. Select Done.
SetSlideshowTransition
You can set the transition ‘special effects’ as photos transition from one to another during a slideshow.
1. On the
HOME screen, press
to display the
Setup Menu.
2. Select
SlideshowSetup.
3. Use
to select SlideshowTransition, and use
to select your desired setting.
Off=Photostransitionfromonephototothenextwithoutspecialeffects.
Random(default)=Photoswilltransitionusingallspecialeffectsrandomlythroughoutaslideshow.
Remainingspecialeffects=Chooseindividualtransitioneffectasdesired
4. Select Done.
SetSlideshowShuffle
You can set the slideshow to display your photos in a random ‘shuffle’ order, or display them in the order as stored on
the selected media source.
1. On the
HOME screen, press
to display the
Setup Menu.
2. Select
SlideshowSetup.
3. Use
to select SlideshowShuffle, and then use
to select your desired setting.
ON=Displaysphotosrandomly
OFF(default)=Displaysphotosintheorderfoundonselectedmediasource
4. Select Done.
CALENDAR/CLOCK
Your DPF can be used as a personal desk calendar which displays a continuous slideshow of photos on the selected
media source, and real-time clock. To display the
CALENDAR/CLOCK screen, select CALENDAR from the HOME screen.
The slideshow will be displaying photos found on the currently selected media source.
SelectMediaSourceforCalendarSlideshow
You can easily change the media source if you want the calendar/clock slideshow to display photos from a different
media source (i.e., memory card, slideshow folder).
On the
CALENDAR/CLOCK screen, press , and then select the MediaSource button in the upper right corner.
Select the desired media source from the
Select Media screen.
To Next Page
Loading...
