Chapter 1 General Information
Options and Accessories
15
1
• EN 55011(1991) Group 1, Class A/CISPR 11(1990): Limits and Methods of Radio
Interference Characteristics of Industrial, Scientific, and Medical (ISM) Radio -
Frequency Equipment
Options and Accessories
Options
Option ‘‘0E3’’ and ‘‘0E9’’ determine which power-line voltage is selected at the
factory. The standard unit is configured for 115 Vac ± 10%, 47-63 Hz input voltage.
For more information about changing the power-line voltage setting, see ‘‘Power-
Line Voltage Selection’’, starting on page 22 in this chapter.
Option Description
0E3
230 Vac ± 10%, 47-63 Hz input voltage
0E9
100 Vac ± 10%, 47-63 Hz input voltage
1CM
Rack mount kit (HP part number 5063-9243)
910
Extra manual set (same language as the selected language manual
set when you order the power supply)*
Accessories
The accessories listed below may be ordered from your local Hewlett-Packard Sales
Office either with the power supply or separately.
HP No. Description
10833A
HP-IB cable, 1 m (3.3 ft.)
10833B
HP-IB cable, 2 m (6.6 ft.)
34398A
RS-232, 9 pin (f) to 9 pin (f), 2.5 m (8.2 ft.) cable; plus 9 pin (m) to
25 pin (f) adapter
34399A
RS-232 adapter kit (contains 4 adapters):
9 pin (m) to 25 pin (m) for use with PC or printer
9 pin (m) to 25 pin (f) for use with PC or printer
9 pin (m) to 25 pin (m) for use with modem
9 pin (m) to 9 pin (m) for use with modem
*To order a separate set of English User’s guide and Service guide, order
HP part number E3634-90000.
To Next Page
Loading...
