Not all configuration components are available in all regions/countries.
c04895999 — DA – 15477 — Worldwide — Version 16 – March 22, 2017
Wireless Display Extension (WDE)
AV PAL (WDE) as defined by WiGig alliance
AVC/MPEG support -
encoder
WDE supports generation of MPEG-PS /
MPEG-PES packets as described in the
WDE standard
WDE supports AVC (H264) encoder, intra
only, 4:4:4 Chroma subsampling.
Different visually lossless and lossy
scenarios are supported by configuration
AVC/MPEG support –
decoder
H.264 CAVLC 4:4:4 I-only sub sampling is
supported
Client device side
DP (Display port) v1.2a – HBR (1, 2, 4
lanes)
Dock device side
DP v1.2 – HBR (1, 2, 4 lanes)
HDMI v1.4a (through external Hub or
cable adapter)
DP++ compatible
Note: DP v1.2 is backward compatible
with DP v1.1a
DP Resolution and Frame
Rate Support
HDMI Resolution and
Frame Rate Support
DP will support the following resolutions
640x480, 1280x720, 1920x1080,
1920x1200, 2560x1440, 2560x1600
and frame rates –
24, 25, 30, 50 and 60 Hz
All resolutions are in progressive mode
(no interlaced supported)
Specifically, the following resolutions and
frame rats will be supported
640x480p60
1280x720p60
1920x1080p60
1920x1200p60
2560x1440p60
2560x1600p60
Note: resolution and refresh rate may
change in situations where there is a bad
link or strict limits on TDP
HDMI supports the following resolution
and frame rates –
640x480p60
1280x720p60
1920x1080p60
1920x1200p60
2560x1440p60
2560x1600p60
Note: resolution and refresh rate may
change in situations where there is a bad
link or strict limits on TDP