3. Remove the NFC module (3) from the computer. The module is secured with adhesive.
To install the NFC module, reverse this procedure.
When installing an NFC module, be sure to place the hole in the module onto the peg in the computer.
Smart card reader
To remove the smart card reader, use this procedure and illustration.
Table 8-7
Smart card reader descriptions and part numbers
Descriptions Spare part numbers
Smart card reader
NOTE: The smart card reader spare part kit does not include the antenna. The antenna is included in
the touchpad spare part kit.
N96232-001
Smart card reader cable (included in Cable Kit) N98721-001
Smart card reader 81
To Next Page
Loading...
