CAUTION: Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work and initiate Hibernation or shut down the
computer through Windows before removing the battery.
1. Remove the service door. See Removing or replacing the service door on page 62.
2. Slide the two battery release latches to the unlocked position (1). You will be able to see red
beneath the latches. Using the cloth tab, tilt the battery up (2) and then lift it (3) out of the
enclosure.
Inserting or removing the battery 61
To Next Page
Loading...
