c. Gently press the memory module (3) down, applying pressure to both the left and right
edges of the memory module, until the retention clips snap into place.
CAUTION: To prevent damage to the memory module, be sure that you do not bend the
memory module.
7. Replace the battery (see Inserting or removing the battery on page 32) and the service door (see
Removing or replacing the service door on page 43).
8. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
9. Turn on the computer.
Updating programs and drivers
HP recommends that you update your programs and drivers on a regular basis with the latest
versions. For U.S. support, go to
http://www.hp.com/go/contactHP. For worldwide support, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
68 Chapter 10 Maintenance
To Next Page
Loading...
