EasyManuals Logo

HP EliteBook 840 G2 Notebook PC Service Manual

HP EliteBook 840 G2 Notebook PC
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Display assembly
NOTE: Non-TouchScreen display assemblies are spared at the subcomponent level only. See Display panel
on page 70 earlier in this chapter for information on removing the display bezel, display panel, and webcam/
microphone module.
Description Spare part number
14.0-in, FHD, UWA, 72% CG, 300 nits, eDP 1.3+PSR slim (1920×1080), capacitive TouchScreen display
assembly for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC
computer models (includes webcam and microphone)
784459-001
14.0-in, FHD, UWA, 72% CG, 300 nits, eDP 1.3+PSR slim (1920×1080), capacitive TouchScreen display
assembly for use only on HP EliteBook 840 G2 Notebook PC and HP EliteBook 740 G2 Notebook PC
computer models (includes microphone)
784458-001
14.0-in, FHD, UWA, 72% CG, 300 nits, eDP 1.3+PSR slim (1920×1080), capacitive TouchScreen display
assembly for use only on HP ZBook 14 G2 Mobile Workstation computer models (includes webcam
and microphone)
795948-001
14.0-in, FHD, UWA, 72% CG, 300 nits, eDP 1.3+PSR slim (1920×1080), capacitive TouchScreen display
assembly for use only on HP ZBook 14 G2 Mobile Workstation computer models (includes microphone)
795947-001
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see Service cover on page 51), and then remove the following components:
a. Battery (see Battery on page 53)
b. Keyboard (see Keyboard on page 63)
c. Base enclosure (see Base enclosure on page 75)
Remove the display assembly:
1. Release the display panel cable from the routing channel built into the system board, and then
disconnect the display panel cable (1) from the system board.
ENWW Component replacement procedures 99

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP EliteBook 840 G2 Notebook PC and is the answer not in the manual?

HP EliteBook 840 G2 Notebook PC Specifications

General IconGeneral
GraphicsIntel HD Graphics 5500
ProcessorIntel Core i5-5300U
RAMUp to 16GB DDR3L
StorageUp to 512GB SSD or 1TB HDD
Display14-inch HD (1366x768) or FHD (1920x1080)
Operating SystemWindows 10, Windows 8.1, Windows 7
Battery3-cell Li-ion

Related product manuals