c. Thoroughly clean the thermal material from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with
the heat sink and system board spare part kits. The following illustration shows the replacement
thermal material locations.
Thermal material is used on the system board components (1) (3) (5) and on the heat sink areas
(2) (4) (6) that service them.
Reverse this procedure to install the heat sink.
System board
To remove the system board, use these procedures and illustrations.
Table
6-11 System board descriptions and part numbers
Description Spare part number
System board (includes processor):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating system
xxxxxx-601: Windows 10 operating system
Models with discrete graphics memory:
● Intel Core i7-10810 processor (OSR) M05245-xx1
● Intel Core i7-10710 processor M14257-xx1
● Intel Core i7-10610 processor M05243-xx1
● Intel Core i7-10610 processor (OSR) M05244-xx1
● Intel Core i7-10510 processor M05241-xx1
● Intel Core i5-10310 processor M05242-xx1
● Intel Core i5-10210 processor M05240-xx1
Component replacement procedures 53
To Next Page
Loading...
