Front
Component Description
(1) Media Card reader Supports the following digital card formats:
●
Secure Digital (SD) Card
●
Secure Digital HC (SDHC) Card
●
Secure Digital XC (SDXC) Card
● MultiMediaCard (MMC)
● MultiMediaCardplus (MMC+)
(2) Display release latch Opens the computer.
(3) Wireless light
●
White: An integrated wireless device, such as a wireless
local area network (WLAN) device and/or a Bluetooth®
device, is on.
● Amber: All wireless devices are off.
(4) Power light
●
On: The computer is on.
●
Blinking: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
(5) Battery light
●
Amber: The computer is connected to external power and
the battery is charged from 0 – 90%.
●
White: The computer is connected to external power and
the battery is charged from 90 – 99%.
●
Blinking Amber: A battery that is the only available power
source has reached a low battery level. When the battery
reaches a critical battery level, the battery light begins
blinking rapidly.
● Off: The battery is fully charged.
(6) Hard drive light On: The hard drive is being accessed.
(7) Speakers (2) Produce sound.
NOTE: To use the SRS Premium Sound software, select Start
> All Programs > SRS Premium Sound.
12 Chapter 2 External component identification
To Next Page
Loading...
